ParkerAC890 系列

The AC890 is a compact, modular systems drive engineered to control speed and position of open-loop and closed-loop, single- or multi-motor AC induction or servo motor applications. Compatible with a wide range of feedback options, the AC890 may be used with any AC motor and virtually any speed/position feedback options. With this flexibility you may not even need to replace your existing AC motor to achieve high performance, saving you time and money. The AC890 is available in 380-460/500V 3-phase 0.75 to 1500HP and 220V-240V 3-phase 0.75 to 10HP.

Features:

The AC890 can be configured for 4 different modes of operation :

8226; Open-loop (volts / frequency) control

This mode is ideal for basic, single or multi-motor speed control.

8226; Sensorless vector control

With its ultra high performance sensorless vector algorithm, the AC890 delivers a combination of both high torque and close speed regulation without the need for any speed measuring transducer.

8226; Closed-loop vector control

Full closed-loop flux vector performance can be achieved with the AC890 by simply adding an encoder feedback 'technology box'. This provides 100% continuous full load standstill torque, plus a highly dynamic speed loop more than sufficient for the most demanding applications.

8226; 4 Quadrant active front-end power supply module

With this configuration, the energy is fed back into the mains supply with sinusoidal currents and unity power factor; a very low current harmonic content is achieved (THD < 3%).

Advantages:

8226; Ultra-fast control loops -

- Torque loop : 62.5μs / - Speed loop : 62.5μs / - Position loop : 62.5μs

Taking advantage of leading edge control algorithms running on a fast 150Mhz microprocessor, the AC890 drive can achieve very high-bandwidth control loops. This allows you to use the drive for the most demanding industrial applications e.g. printing, registration, cut-to-length, rotary shear, converting and slitting.

8226; Safe Torque Off -

- To EN18849 PL-e / SIL3, frame B-F

8226; Minimal delay between the fieldbus setpoints and the c

AC890 是一个紧凑, 模块化系统驱动设计, 以控制速度和位置的开放环和闭环, 单或多电机交流感应或伺服电机应用。与多种反馈选项兼容, AC890 可以与任何交流电机和几乎任何速度/位置反馈选项一起使用。有了这种灵活性, 您可能甚至不需要更换现有的交流电机, 以达到高性能, 节省您的时间和金钱。AC890 在 380-460/500 v 3-阶段0.75 到1500HP 和 220 v-240 v 3-阶段0.75 到10HP 提供。 特点: AC890 可配置为4种不同的操作模式: ·开环 (伏特/频) 控制这种模式是*理想的基本, 单或多电机速度控制。 ·无传感器矢量控制, 其超高性能无速度传感器矢量算法, AC890 提供了高扭矩和关闭速度调节的组合, 不需要任何速度测量传感器。 ·闭环矢量控制全闭环磁通矢量性能可通过简单添加编码器反馈 "技术盒" 实现 AC890。这提供了100% 连续的全负荷静止扭矩, 加上一个高度动态的速度回路, 足以满足*苛刻的应用。 ·4象限主动前端电源模块以此配置, 将能量反馈到电源电源中, 正弦电流和统一功率因数;实现了极低的电流谐波含量 (3%)。 优点: ·超快控制回路--扭矩回路: 62.5μs/-速度回路: 62.5μs/位置环: 62.5μs 利用领先的边缘控制算法运行在一个快速的150Mhz 微处理器, AC890 驱动器可以实现非常高带宽控制环路.这使您可以使用驱动器的*苛刻的工业应用 e. g. 印刷, 登记, 剪长, 旋转剪切, 转换和分切。 ·安全转矩--EN18849/SIL3, 帧 B F ·现场总线设定值与 c 之间的*小延迟

企业名片